Clip Stryd® Pod on the Shoe

Attach the Stryd to the shoe. Secure Stryd to the shoe.

Updated over a week ago

Clip Stryd® Pod on the Shoe Using 4 Laces

  1. Place the clip under the last two rows of your desired shoe

  2. The thick end should be facing toward the shin

  3. Place the wider end of the Stryd in the thick end of the clip, with the flat part facing down.

  4. Then press down on the front until you hear a click

  5. Press the front of the clip hard! It is best to bend the clip rather than break Stryd.

Clip Stryd® Pod on the Shoe Using 5 Laces

Sometimes when attaching the Stryd pod to your shoe you will want to use 5 laces to secure the pod.

  1. Place the clip under the last 5 laces of your desired shoe

  2. Thick end should be facing towards the shin

  3. Place the wider end of the Stryd in the thick end of the clip, with the flat part facing down.

  4. Confirm the lace is not covering the wind port then press down on the front until you hear a click

  5. Press the front of the clip hard! It is best to bend the clip rather than break Stryd.

If you would like to change shoes or remove Stryd from your running shoes, please follow these steps!

  1. Press down on the front tab of the clip to relieve tension

  2. Stryd should be able to be removed easily

  3. Press the front of the clip hard! It is best to bend the clip rather than break Stryd.


    Attach the Stryd pod to lateral laced shoes like the Nike Next%

    For best accuracy for pace, distance, and power it is best to keep Stryd centered on the shoe. With shoes like the Nike Next%, it is possible that Stryd is not properly centered. Below are the pictures and video to keep the Stryd pod centered.

    To give you an idea of angled vs straight:

    new-nike-marked__1_.png

    Nike Next% V2 (which has laces even more sideways):

    mceclip0.png

    Original Next%


Did this answer your question?